<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sun, 11 Jun 2000 14:42:17 +0100
From   : Mike Tomlinson <mike@...>
Subject: Re: Master problems

In article <49ccf9a9d9clive.holland@...>, Clive
<clive.holland@...> writes
>Hi,
>
>I wonder if anyone could point me to solving a problem with a Master which
>I have just acquired.
>
>After switching on, the screen displays the message "this is not a
>language" (or similar phrase) and leaves a * prompt.

>ROM F Terminal 01 Unplugged
>          E View 02 U/P
>          D AcornDFS 50 U/P
>          C Basic 04  U/P
             ^^^^^     ^^^
BASIC is unplugged.  At the * prompt, type:

*INSERT 12
*CONFIGURE LANGUAGE 12 (might be *CONFIGURE LANG 12)

then press ctrl-break.

this will get you BASIC back, but other ROMS are also unplugged:  you
will need to *INSERT 15, 14, 13 and 9.

Your battery is probably on the way out: type *TIME or PRINT TIME$ and
see if that is correct.  If not, replace the battery.


>          B Edit 01
>          A Viewsheet 02
>          9 DFS 79 U/P
>          8 - 0 ?  U/P
>

-- 
Mike Tomlinson
mike@...          
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>