Date   : Fri, 02 Jun 2006 11:40:49 +0100
From   : "Ian Wolstenholme" <BBCMailingList@...>
Subject: MDFS Parity Mod

Can anybody remember the "rule" for attaching SCSI drives to
an MDFS which has had the parity mod carried out?  I thought it
was that if the Parity mod is present and the SCSI drive has a
parity link jumper, then parity must be enabled on the drive for it
to work properly.  However, I have just tried a Seagate drive with
parity enabled and disabled and there appears to be no difference.

Best wishes,



Ian