<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sun, 02 Aug 2009 14:29:31 +0100
From   : bbcmailinglist@... (Ian Wolstenholme)
Subject: Dircopy and Logcopy Freezing on L3 Econet

Both machines have internal co-processors but they are disabled.  They
have worked fine in the past, so something has happened.  I need to investigate
a bit more to get to the bottom of it.

Best wishes,


Ian

----- Original Message -----
From: Andy Ford [mailto:acorn@...]
To: bbc-micro@...
Sent: Sun, 02 Aug 2009 13:19:42 +0100
Subject: Re: [BBC-Micro] Dircopy and Logcopy Freezing on L3 Econet

Hi.

If its enabled, try turning off the Tube on the machine that's running 
these. It "might" help. The only reason I suggest this is I had a couple 
of strange problems with HDInit a while ago (cured by running that with 
the Tube disabled)

I may be completely wrong :D , but it won't do any harm to try it if the 
machine(s) your running it on have it enabled.


Andy.


Ian Wolstenholme wrote:
> I know I've used these before, but now Dircopy and Logcopy won't run
> from my Level 3 Econet server.  They will load, but trying to run them causes
> the user station to freeze.  If I press BREAK I just get "Acorn MOS" and
nothing
> else till I press CTRL-BREAK.
>
> I've tried this on two different Masters and the same thing happens both times.
>
> Does anyone know why this has started happening?
>
> Best wishes,
>
>
> Ian
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> bbc-micro mailing list
> bbc-micro@...
> http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro
>   

_______________________________________________
bbc-micro mailing list
bbc-micro@...
http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>