Date   : Sat, 24 Nov 2012 08:56:00 +0100
From   : kortink@... (John Kortink)
Subject: Upgrading a 32016 co-processor to 10MHz

On Fri, 23 Nov 2012 21:56:30 -0000, "Rob Coleman"
<rgcolem.myorg@...> wrote:

>I?ve got hold of a 10MHz chipset for my 32016 second-processor.
>Does anyone know if it is safe to run it at 10MHz without replacing
>the ram with a faster variety? 

It will probably work okay, although I haven't researched it well
enough to be sure.

You can get the 32016 Service Manual from my website. Go to :

http://web.inter.nl.net/users/J.Kortink/home/documents/index.htm

I replaced the RAM in mine with 100 ns parts, just to be on the safe
side. So I can't check. Well, I could, but I'm not replacing parts
on a rather rare 32016 Second Processor that frivolously .... I've
been running it successfully at 11 MHz (with an entirely 10 MHz
rated chipset).


John Kortink

-- 

Email : kortink@...         
Wwweb : http://www.inter.nl.net/users/J.Kortink

GoSDC, the ultimate BBC B/B+/Master/Electron storage system :
http://web.inter.nl.net/users/J.Kortink/home/hardware/gosdc