Date   : Sun, 10 Mar 2013 22:24:24 +0000
From   : percy.p.person@... (Ed Spittles)
Subject: Qudos MINICHIP / Quickchip ECAD and Ferranti

With Christian's stitching software, maybe strict XY stepping isn't too
critical: so long as there's overlap between tiles, and they are in focus
and at the same magnification, perhaps it'll be fine?

Ed

On 10 March 2013 20:42, Philip Pemberton <philpem@...> wrote:

> On 27/02/13 18:29, Theo Markettos wrote:
> > As an aside, I still have the decapsulated Tube ULA but have failed to
> > find the necessary lab time to image it (it's not my lab so finding
> > microscope time is tricky, especially as this is a side project).  If
> > anyone is likely to make more use of it I'm happy to pass it on.
>
> Well, I've got an Olympus SZ30 stereo microscope, DSLR attachment, two
> sets of eyepieces (10x and 20x widefield) and homebrew LED ring light.
>
> Problem is I don't have an X/Y stage so imaging at high zoom (0.9x to 4x
> objective + 10x or 20x eyepiece = 40x or 80x) would be extremely difficult.
>
> I might be able to bodge something together out of all-thread, stepper
> motors and MDF, but I doubt it'd be up to much! :)
>
> Cheers,
> --
> Phil.
> philpem@...
> http://www.philpem.me.uk/
>
> _______________________________________________
> bbc-micro mailing list
> bbc-micro@...
> http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro
>