Date   : Mon, 09 Sep 1985 20:57:45 PDT
From   : crash!kevinb@SDCSVAX.ARPA
Subject: Info(S-100) on Seattle 16K Plus,PMMI MM-103 program

I am seeking information and schematics on the Seattle Computer Products
SCP-16K Static RAM Board. I already know about how to address it, but would
like more info on the "bank" switches and the jumper at location V, also.

I am also looking for an explanation of what the jumpers on the Imsai SIO board
do. I would love to upgrade my speed on ser port a to 9600 baud +, and info on
the ser port b would be verrry handy indeed, for modem uses.

Further, I can't seem to get a program that will work on a PMMI MM-103. Any 
help on what the DIP switches on it do, and how to configure, for example,
MDM7, would be handy. I would love a chance to get a program that works on
a system using the SS NorthStar floppy drive system. I would be more than
willing to discuss buying/sending out a floppy to get the info copied onto.
Also, any suggestions on how to expand my CP/M to handle 52 to 56K. I seem
to be able to go to 52K, but I am not sure if the 56K interferes with the PMMI.
Expanding to 60K seems impossible, as the N* Disk controller starts at E000,
going through at least E900. Any ideas out there?

			Thanks in advance,

Kevin J. Belles - UUCP {ihnp4,cbosgd,sdcsvax,noscvax}crash!kevinb
~~~~~ ~~ ~~~~~~ - ARPA crash!kevinb@{ucsd,nosc}.ARPA
"All that we see and seem is but a dream within a dream"

P.S. Any Imsais running out there - what kind of system are you running, using
what? We wanna know.... KjB