Date   : Sat, 18 Jul 1987 11:00:38-EDT
From   : "Mark Becker" <Cent.Mbeck%OZ.AI.MIT.EDU@XX.LCS.MIT.EDU>
Subject: Xebec S-100 host adapter information request

Hello -

     Is anyone using Xebec's S100-to-SASI host adapter with a 1410
controller?  I have one in front of me and would love to get it
running.. but the adapter has had a bunch of wires added, several
traces cut, and I have no idea what options were wired in.  Also,
there are several jumper pads on the board which are not mentioned in
the meager documentation and I hesitate plugging this thing in without
more information.

     I have a diskette with Xebec's "plug-and-go" installation
software and some READ.ME-type files but none of them discuss board
jumpers.

     This is a Rev. 07 board and appears to be the non-DMA version.
Which brings up another point:  How tough would it be to install the
additional chips and hardware to turn it into the DMA version?

     Your help is appreciated -

Mark