Date   : Wed, 20 Jul 1988 14:52:34 GMT
From   : tektronix!orca!tekecs!frip!andrew@ucbvax.Berkeley.EDU (Andrew Klossner)
Subject: Kaypro and Spinwriter 7710

[]

       "The 7710 uses hardware handshaking, if I remember correctly."

The 7710 will do just about anything ... it will do hardware handshake,
XON/XOFF, or ETX/ACK.  This is all selected by dip switches.  But the
pinouts are nonstandard, so if you want hardware handshake you'll have
to make a special cable.

I've had a 7710 for six years, hooked to my TRS-80 model II running P&T
CP/M.  (I never dreamed this system would keep working for so long!)  I
use hardware handshake at 1200 baud.

  -=- Andrew Klossner   (decvax!tektronix!tekecs!andrew)       [UUCP]
                        (andrew%tekecs.tek.com@relay.cs.net)   [ARPA]