Date   : Mon, 19 Aug 1991 18:01:41 GMT
From   : prism!jm59@gatech.edu (MILLS,JOHN M.)
Subject: Re: modem for televideo 803

In article <1991Aug19.133043.13321@world.std.com> bmarcum@world.std.com
(Bill Marcum) writes:
>You should be able to use any Hayes-compatible RS-232 standard external modem.

I did this also.  "Hayes Compatible" mainly means the modem will execute a
set of character commands for modem setup, dialing and storing phone numbers,
etc.  Be sure you get a copy of the commands; they should be listed in the
manual, and many are prefixed "/at" (I think).  You may have to remember
a few commands if you need to use the modem in the non-default condition, and
others such as stored dialing sequences, are also handy.  My terminal
emulator did not store any commands or setups itself, but other cp/m terminal
utilities may do so.

Regards --jmm--


-- 
MILLS,JOHN M.
Georgia Institute of Technology, Atlanta Georgia, 30332
uucp:    ...!{decvax,hplabs,ncar,purdue,rutgers}!gatech!prism!jm59
Internet: jm59@prism.gatech.edu