<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sun, 01 Sep 1991 14:22:01 GMT
From   : bobsbox!gnat!cmcewen@rutgers.edu (Chris McEwen)
Subject: Re: SASI for Big Board (Xerox)

del@fnx.UUCP (Dag Erik Lindberg) writes:
> I recently acquired a DTC SASI->MFM bridge adapter.  I was thinking
> that it might be easily hooked up to the parallel ports on a BB.
> Has anybody written a driver to do this?

Wayne Sung wrote an article on interfacing a Bournelli drive to a CP/M
computer in the January/February 1991 issue of The Computer Journal. It
included both schematics and source code and involved adapting the
parallel port to a SCSI port. Since SASI is the forerunner of SCSI, I
would think you could get a headstart with Wayne's approach. You can
order the back issue for $4.50 (US) or $6.00 (Foriegn, airmail) in US
funds. Ask for issue number 48.

Chris McEwen      Internet: cmcewen@gnat.rent.com | The Computer Journal
Editor, TCJ    uucp: ..!att!nsscmail!gnat!cmcewen | PO Box 12
                        GEnie: c.mcewen -or- TCJ$ | S Plainfield NJ 07080
                                                  | (908) 755-6186

<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>