EPSON SPECIFCATIONS PAGE 18 Terminal I/O Function ___ Chip Select Input CS1 I ___ ____ _____ CS1, CS1-N (N: 1-4) = active "0" CS1-N CS2, CS2-N (N: 1-4) = active "1" (N: 1-4) As for models which display more than CS2 80 characters, in other words, models CS2-N which use plural controller LSIs, each (N: 1-4) controller LSI has a chip select terminal and corresponds to each N = Chip display area. number For corresponence with display areas, refer to IV. E. "Character Address Code (P. 27)". ___ Ready Output RDY O _____ These terminals output Ready or Not RDY-N Ready of inside conditions of the (N: 1-4) hardware. N = Chip RDY, RDY-N = "0": Ready number RDY, RDY-N = "1": Not Ready (Note) When Reset signal is input, RDY is "0". (This signal status will be "Ready".) As for models which display more than 80 characters, in other words, models which use plural controller LSIs, each controller LSI has a ready output terminal, and corresponds to each display area. For correspondence with display areas, refer to IV. E. "Character Address Code (P. 27)". No. Signal No. Signal A1 Vdd (+5v) B1 ~RESET A2 ENB B2 nc A3 nc B3 ~RDY-1 A4 ~RDY-2 B4 ~RD A5 ~WR B5 ~CS1-1 EA-Y40040AT A6 ~CS1-2 B6 CS2-1 A7 CS2-2 B7 A0 EA-Y20080AT A8 D0 B8 D1 EA-Y80025AT A9 D2 B9 D3 A10 D4 B10 D5 A11 D6 B11 D7 A12 VR1 B12 VR2 A13 FG B13 Vss (GND)