Date   : Tue, 28 Apr 1998 10:10:59 +0100 (BST)
From   : Robert Pfeifer <Mzyg142@...>
Subject: Re: Single to Dual Drive Conversion

On Mon, 27 Apr 1998, Mark Usher wrote:

}Oh easy peasy pudding and pie.
}You need
}
}1) A drive cable that will take both drives. You can use a PC floppy drive
}cable - one of the older ones that still has the 5.25 connector on it. You
}will have to "remove" the twist in the cable though. Gently prize off the
}connector, untwist the cable, align the connector back on the cable and
}squeeze all back together using a vice. Failing that use the kitchen drawer
}to hold it in place and then give the drawer a good whack with a hammer,
}being carefull at the same time not to dint the woodwork.

Aah, somewhere I can help! Place a large block of scrap wood on the front
of your kitchen drawer first so this gets dented instead.

Tape it on, of course. No nails.

Rob

-- 
"File 'C++' is a directory" - Pico
Robert Pfeifer - mzyg142@...                      
http://www.nottingham.ac.uk/~mzyg142/