Date   : Sun, 16 Jul 2000 18:47:29 +0100
From   : Mike Mallett <mike.mallett@...>
Subject: Re: Second Processors (FWD)

I had a Master 512 which has the internal x86 co-pro and an external
Acorn Z-80 co-pro. 

It was possible to switch between the three CPUs from the keyboard,
although I can't remember the exact commands.

I'm sure you know all apart from the 6502 need to boot an OS from a drive.




=====================================================================
Hello,

I have a Master 128 with an internal 6502 second processor. I also 
have an external Z80 second processor.
I have tried to get this combination to work on this single machine, 
and while the 6502 works fine when the Z80 is switched off, I cannot 
get the Z80 to work - even after a *CONFIGURE TUBE EXTERNAL.

Does anyone know if it is possible to have both of these second 
processors attached to the same machine so they can be used independantly?

Mike.
-- 
Michael Foot <mikef@...          >
http://www.voyager.co.nz/~mikef


=============== End of forwarded message ==================