Date   : Tue, 25 Jul 2000 08:35:52 +0100
From   : Chezz <achester@...>
Subject: Re: analog port

I think ( but my memory is a little fuzzy) that you can use the command
ADVAL(x) where (x) is a number from 0 to 3. This number corresponds to the
analogue channel that you want to read.
       Sorry its not much, but its all that I can remember. The advanced
user guide explains it in more detail.
       
               Hope this helps,

               Chezz.

-----Original Message-----
From: midnighttrooper@...
[mailto:midnighttrooper@...]
Sent: 23 July 2000 15:59
To: bbc-micro@...
Subject: [BBC-Micro] analog port


Can anybody help?

Am looking for a way to take data from my Beeb's (BBC B+) analog port. I
know there is a 
simple way, but I just don't know what that is.

Need it to work joystick (have already) for a piece of software I'm writing.

Thanks in advance!

AML
Midnight Trooper


"What's a network?" -- Bill Gates, mid 1980s
"640Kb ought to be enough for anybody." -- Bill Gates, 1981
====================================
Midnight Trooper ICQ: 31204557
====================================
midnightTrooper@...
====================================
http://www.digital-avatar.com/members/midnighttrooper
====================================

I recommend ...

1. download ICQ FREE (if you haven't already)@www.icq.com
2. get GuruNet FREE (it's GREAT - you *need* it!)@www.gurunet.com
3. donate food to 3rd world countries for FREE@...
4. join LOST international FREE at http://go.to/lost
5. visit the CLS JSoc at http://come.to/jsoc_cls
6. visit ME at http://www.digital-avatar.com/members/midnighttrooper