Date   : Thu, 07 Sep 2000 14:18:00 +0100 
From   : John Simpson <Simpson.J@...>
Subject: Re: RGB to composite

On Thursday, September 07, 2000 2:06 PM, Alexander [SMTP:mediadyne@...]
wrote:
> I just had an idea.
> What 'IF' I was to bypass the connections that go to the RF unit, these
are 
> composite connections that are full colour and make a wire transferring 
> them outside the machine and then directly connect that to a composite 
> monitor???
> 
> Wouldn't that be easier than the other methods???
> 
> What do you think John??

I don't really understand what you mean. 

The combined red, green and blue signals are already available from the
machine's "video out" port as a composite video signal, and this is what is
fed into the RF unit. So by tapping into this all you'd get is the composite
video signal which is already available.

I don't really know what you are trying to achieve. If you want colour
composite video I suggest you try the motherboard modification which another
poster (Keith Gill) has just described.

john