Date   : Thu, 07 Sep 2000 21:35:08 +0300
From   : Alexander <mediadyne@...>
Subject: Re: RGB to composite

At 02:22 μμ 7/9/2000 +0100, you wrote:
>It'll work, but the impedance of the signal supplied to the RF modulator
>is high. You'll need a composite monitor that can have its termination
>disabled, or a high-impedance input, otherwise you will get a very dark
>picture. The modification to the main circuit are a better bet.
>
>Tim.

Thank you.

Just a note to the list.
First I got most of the emails after I wrote my idea.
Second, English is not my native language so perhaps many times I am not 
understanding what many of you are saying or, I may not be making my own 
sentences clear enough.
After seeing the links, and downloading some data, yes, of course I now see 
there are many easier ways to do it, however I still have some questions as 
to the terminology used.
Third, there are many parts for example such as the '470 PicoFarad 
capacitor' which I do not know what the equivalent is in my native language 
and country, so looking for easier answers is what I am trying to do.
Last, I would appreciate it If some kind soul could explain to me what it 
means to 'fitting link 39' or 'Link 39 must be made'. It's not about the 
lack of technical knowledge but rather the lack of understanding the 
specifics of this terminology.

Thank you.
Alexander