Date   : Tue, 13 Jan 2004 08:08:17 GMT
From   : Pete Turnbull <pete@...>
Subject: Re: Host adapter Issue D

On Jan 13,  2:46, Mark Usher wrote:

> > Why bother?  Use a multi-drop SCSI cable and attach more than one
SCSI
> > hard disc.  Or the Adaptec board allowed you to attach two MFM
drives,
> > IIRC.
>
> Because I wanted to attach one MFM drive and one SCSI drive and
transfer
> some files across.
> OK, I could try setting the SCSI drive to ID1 and attach the Adaptec
> board at 0, although the adaptec may claim ID 0 & 1 for the two
drives
> that it can support.

No, it doesn't.  There are  three links on the ACB4000 to set the SCSI
ID.  It's only one device and only uses one ID; the two drives appear
as LUNs 0 and 1 within that ID.

-- 
Pete                                           Peter Turnbull
                                               Network Manager
                                               University of York