Date   : Sun, 23 May 2004 22:10:30 +0100
From   : Chris Smith <c.s@...>
Subject: Tube / Master Coprocessor question

Hi,

Not sure if this is possible...   

Firstly, I own a Master Turbo.  It got a stay of execution from the wife
:-)

Is it possible to run "application code" on both processors at once? 
Preferably interrupt driven on the IO processor (via 1MHz bus).  I wish
to implement a simple protocol handler which is called from the language
processor.

The basic idea is to implement a "hardware accelerated TCP/IP stack"
using a large and powerful Atmel controller wired to the 1MHz bus and
shove the data up and down it as required at application level similar
to the already present streams concept in MOS.  Smoking crack I know ;-)

Cheers all,

- Chris.