Date   : Mon, 21 Mar 2005 09:58:34 +1030
From   : "Raf" <rafg1@...>
Subject: Re:Nick B GoMMC - Beeb and Master fail to start up.

Hi Nick,

One of the things that I have noted is that somehow, MMCWI gets corrupted 
and when I use an older version, eg, V.0.57, things begin to work.

If this fails, another thing I have found is to start to re-program the 
GoMMC from scratch, updating it with each version, although I have found 
that if you start from V.0.56 then 0.57, 0.60, 0.62, 0.63 and finally *MMCUP 
of  V 0.64, should get you there.

It may be important too, I have found, to use the ROM Image Patches only, 
and to remove all EPROM's and cartridges BEFORE you begin, and leave them 
out of your machine thereafter, trying , perhaps, to re-insert one at a 
time, when you have GoMMC running.

I hope this helps you Nick,

Regards

Raf G.

----- Original Message ----- 
From: "Nick B." <nick@...>
To: "BBC Micro list" <bbc-micro@...>
Sent: Sunday, March 20, 2005 7:36 AM
Subject: Re: [BBC-Micro] GoMMC - Beeb and Master fail to start up.


>
> On Sat, 19 Mar 2005 21:38:00 +0100, "John Kortink"
> <kortink@...> said:
>> On Sat, 19 Mar 2005 17:49:53 +0000, "Nick B." wrote:
>>
>> >I've got a GoMMC card which was purchased second hand.
>> >[...]
>>
>> Better ask questions on the GoMMC mailing list, it's
>> more effective.
>
> No replies there to date, also 8bs.com appears to be down so I cant'
> post there at present. That just leaves this list and
> comp.sys.acorn.hardware.
>
> Rgds,
> -- 
> Nick B.
>
>
>