Date   : Fri, 24 Jun 2005 18:06:15 +0100
From   : Mike Howard <aixguru@...>
Subject: BBC/B+ 64k/128k & Econet

Hi All,

I have a switchable BBC/B+. It has an Acorn card fitted and a switch to 
select 64k or 128k (I've no idea if this is a standard set-up). One of 
the leads from the switch is soldered to pin 16 of IC88 (no chip is 
present at IC88).

My question is this; Does anybody know, if fitting Econet to this B+ and 
therefore fitting a 74LS123 to IC88, would cause problems or would it 
just be a case of re-soldering the lead to pin 16 of the 74LS123?

Cheers,
Mike.
-- 
Mike Howard                    aixguru at blueyonder dot co dot uk
Eccleston                       (Hotmail Reply-To is a spam trap)
UK