Date   : Thu, 28 Jul 2005 21:17:38 +0200 (BST)
From   : Johan Heuseveldt <johan@...>
Subject: Re: Econet-Ethernet bridge

Hi,

On Thu 28 Jul, Rob wrote:
> > On Thu, 2005-07-28 at 11:32 +0200, Johan Heuseveldt wrote:

> > > And additional hardware for clocking the 68B54 from the clock remote
> > > signals, and sensing clock presence (nDCD input), and contention logic
> > > (nCTS input), and the line drivers of course.
> 
> there's not much needed for these, and they can be cribbed from the BBC 
> circuits of course.

Remember, we are talking about the outside end of the parallel
interface/connector of a PC, which needs - somehow - to address and
control that hardware from there off.

[snip]


greetings,
Johan

-- 
Johan Heuseveldt <johan@...              >
  aka  waarland

  The best place is a Riscy place
 
That man is richest whose pleasures are cheapest - Thoreau