Date   : Tue, 16 Aug 2005 13:57:49 +0000
From   : Jules Richardson <julesrichardsonuk@...>
Subject: Re: Level 3 fileserver - status...

On Tue, 2005-08-16 at 14:27 +0100, Mark Usher wrote:
> On Tue, 2005-08-16 at 11:23 +0000, Jules Richardson wrote:
> > Getting an Econet running *might* be hard; I seem to have any number 
> > of Master Econet modules and wall boxes, plus four clock boxes, but a 
> > questionable number of cables and only one terminator (SJ branded, but 
> > I assume it's Econet)
> If you are running a master as an Econet user, you will need to use the
> SetStation utility to set the station number. 

Hmm, presumably only if I need to change the station number from the
default assumed by the master? In this case, the fileserver Master
decided it wanted to be station 72, and the client Master decided it was
happy as station 67.

Good enough to get things running; I did a *FS 0.72 to set the
fileserver address on the client, and things seemed to be working (first
login attempt resulted in disk activity, presumably as the fileserver
loaded and cached the accounts file)

> Also don't forget to plug in an ANFS ROM.

I was lucky that I had some spares! :)

cheers

Jules