<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sat, 11 Feb 2006 21:31:00 -0000
From   : "neil f" <faz@...>
Subject: FW: Re: B+ 64k won't respond to keyboard, Econet fitted

 

 

> -----Original Message-----
> From: Majordomo List Manager [mailto:majordomo@...] On
Behalf 
> Of Mike Tomlinson
> Sent: Saturday, February 11, 2006 7:03 PM
> To: bbc-micro@...
> Subject: Re: [BBC-Micro] Re: B+ 64k won't respond to keyboard,
Econet 
> fitted
> 
> In article <20060211135447.DE58E2547F2@...>,
> neil f <faz@...> writes
> 
> >Shift/Break gives "Searching not found" (i.e. when no extra ROMs or
> >68B45 chip fitted).
> 
> The keyboard's working, then.  In another post you say Ctrl-Break 
> works to restore the "32k" in the banner, so the Ctrl key is
working.
> Therefore the system 6522 is functioning.  Do you have sound
> - does Ctrl-Break give a beep?  If yes, does Ctrl-G give a beep?

Ctrl/Break doesn't beep. Ctrl/G doesn't beep. The machine beeps at
switch-on but only the lower tone, not the higher of the two tones
(this is with no secondary ROMs installed, to ensure Econet is not a
factor). Interestingly, after it has been on for about an hour or so,
the machine beeps once. Does it every time it's left on.

> 
> I've seen this symptom when a key has been stuck down, but you say 
> you've tried another keyboard.

Yes, I'm using a know good keyboard and cable.
 
> Very odd.
> 
Indeed.

-Neil.


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date:
10/02/06
 
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>