Date : Wed, 10 May 2006 19:49:15 +0100
From : Philip Pemberton <philpem@...>
Subject: Re: Back in circulation
In message <060510175506@...>
jgh@... (Jonathan Graham Harston) wrote:
> I'll be there with my IDE cards. I've just bought a new soldering
> iron so I'm going to try and put some 16-bit cards together before
> Saturday.
How much are you planning to sell them for? I'd be interested in a kit, a
nd I
can probably burn a ROM myself (I've got an EPROM programmer sitting in t
he
cupboard).
Speaking of which, if anyone wants any ROMs burning, just ask. £1.50 if
you
supply an erased ROM, £3 if you supply a ROM that needs erasing, £6 i
f you
want me to burn it onto a chip from my "stash o' ROMs". Meeting up at
Wakefield would also be an option - I'll probably be there from about 10A
M
onwards.
I've also got a GAL programmer so if anyone wants any GAL PLDs programmin
g,
let me know. I've only got 16V8s in stock though. Price is £5 including
the
chip.
> I'll also have a synth being controlled by my MIDI interface,
> Sprow's ARM CoPro inside my Master and Sprow's MiniB. If I can get
> things sorted properly I'm aiming to get the MiniB with IDE drive
> and MIDI interface controlling the synth!
Oooo. Sounds like that might be worth a look.
> Next to me will be the Domesday System. There will also be the
> Charity Stall where you can often find useful bits of kit. I
> managed to get a disk drive power lead last year when I had just
> run out!
Don't I know it! Picked up a HCCS Vision card for my RiscPC for 50p back
in
2001, and got the Teletext adapter for about a fiver IIRC. One of these d
ays
I really need to take the RPC's backplane out and solder up an I2C output
cable for it. Problem is, to get the RPC out, I'd need to dismantle most
of
the networking hardware...
--
Phil. | Kitsune: Acorn RiscPC SA202 64M+6G ViewFi
nder
philpem@... | Cheetah: Athlon64 3200+ A8VDeluxeV2 512M+
100G
http://www.philpem.me.uk/ | Tiger: Toshiba SatPro4600 Celeron700 256M
+40G