<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sat, 22 Nov 2008 12:33:38 -0000
From   : blip@... (John)
Subject: BBC connected to LDC-television via SCART

Have to confess I've tried the scart solution to a CRT and bought several
VGA adapters for my 17" LCD and still get fuzzy text - so a reasonably fool
proof solution would be welcome!

John T.


-----Original Message-----
From: bbc-micro-bounces+blip=blipit.com@...
[mailto:bbc-micro-bounces+blip=blipit.com@...] On Behalf Of
John Kortink
Sent: 22 November 2008 12:12
To: bbc-micro@...
Subject: Re: [BBC-Micro] BBC connected to LDC-television via SCART


On Sat, 22 Nov 2008 02:08:07 +0100, "janssenp" <janssenp@...>
wrote:

>Hello,
> 
>If I connect a BBC B computer with a 15" LCD television via the
>SCART-plug
>(of course with resistors to bring down the voltage level), will I be
>able to read
>text on the screen in 80-character modes? In other words what will be
>the quality
>of the image on the screen?

I suppose it depends a bit on how well the LCD monitor
scales and interpolates in relation to the native
resolution of its panel, but I'd guess it /should/ be
near perfect in most cases. On my Sony KDL-20S4000, it
is. Near perfect legibility. Probably even better than
the excellent (tubed) TTL-RGB monitor I used 'back then'.

A purely digital signal transfer (e.g. TTL-RGB to DVI)
would only be a tad better in my estimation. By far most
of the quality drop is already prevented by not using
composite video or a derivative.


John Kortink

-- 

Email    : kortink@...         
Homepage : http://www.inter.nl.net/users/J.Kortink

GoMMC, the ultimate BBC B/Master/Electron storage system :
http://web.inter.nl.net/users/J.Kortink/home/hardware/gommc


_______________________________________________
bbc-micro mailing list
bbc-micro@...               
http://lists.cloud9.co.uk/mailman/listinfo/bbc-micro
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>