Date   : Mon, 19 Jan 2009 22:08:59 +0000
From   : splodge@... (Richard Gellman)
Subject: DNFS File Server ignored?

Hi,

I've just tried my hand at a custom DNFS ROM for a Model B, to change 
the default file server and print server station ids. While I didn't 
strictly use JGH's CustomDNFS program, I did examine it to do determine 
which addresses to modify, thusly:

&2EE - Network number, set to 0
&2E7 - File Server Station - Set to &C0 (192)
&304 - Print Server Station - Set to &C0 (192).

0.192 is an A3020 running !SoftMDFS from JGH and also !awSpooler, and 
works perfectly with the M128 where the FS/PS can be *CONFIGURE'd. But 
on my modified DNFS, the changes are ignored. I read the ROM back in 
through the EPROM programmer and confirmed the bytes have been changed, 
but I can't get a regular *I AM to work; I have to specify *I AM 192 to 
sucessfully log on.

Likewise, the print server station is not what it should be. I can't get 
any response until I run *PS 192.

Have I missed a step here?

-- Richard