Date   : Mon, 09 Mar 2009 22:05:51 +0000
From   : me@... (me@...)
Subject: Knackered CoPro (Was: Disable tube?)

On 9 Mar 2009, at 21:35, Richard Gellman wrote:

> Take a look around the co-pro board and the connectors and see if
> anything is being bridged or if anything has settled on any pins.  The
> fact that some paths are working leads me to believe its an address
> decoding problem on the co-pro board more than anything.

Success!

I don't really know what I did, but I gave all of the socketed chips a  
squeeze (all three made a satisfying crunchy noise), I cleaned the  
legs, and I blasted the entire board with an air duster.

...and now it works.

Thanks. :)

~DG