<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Wed, 28 Jul 2010 19:51:58 +0200
From   : rick@... (Rick Murray)
Subject: [OT] bbcdocs website problem

On 28/07/2010 18:12, Mark Usher wrote:

> Would a few of you be kind enough please to see if there are still
 > problems looking at the PDFs. I want to be sure it is fixed.

First try failed:
   http://www.bbcdocs.com/filebase/hardware/circuit/BBC_Master_Schematics

Missing ".pdf"?

Also:
   Additionally, a 404 Not Found error was encountered while trying to
   use an ErrorDocument to handle the request.


Second try:
 
http://www.bbcdocs.com/filebase/econet/Econet%20Advanced%20User%20Guide.pdf

Worked okay.
Ooooh, typeset, not a scan. Sweet!


Third try:
   http://www.bbcdocs.com/filebase/hardware/datasheets/WD177x.pdf

Retrieved okay, but the PDF appears damaged - I see the lower left 
corner of the document zoomed up to fill the page.


Well, PDFs appear to be working for me, now.


Two suggestions, however...

1. Make clicking the logo go to the home page. It's a convention. I only 
looked for the "Home" link when clicking the logo didn't work.

2. Your latest news item says:
--8<--------
Tim Harrison has scanned in the Master 128 Schematic and Hugh Vance has 
been busy donating the Slogger Electron RX and Master Peartree RAM/ROM 
cartridge instructions. Shaun Buckley has also made a contribution with 
a revised edition of the Solidisk EPROM programmer that contains some of 
the revised commands.
--8<--------

This would be more user friendly if the things mentioned linked to them, 
i.e.:
--8<--------
Tim Harrison has scanned in the [Master 128 Schematic] and Hugh Vance 
has been busy donating the [Slogger Electron RX] and [Master Peartree 
RAM/ROM cartridge] instructions. Shaun Buckley has also made a 
contribution with a revised edition of the [Solidisk EPROM programmer] 
that contains some of the revised commands.
--8<--------
(where the bits in [square brackets] are links)



Oh, and if you want a scan of the Econet Design and Installation Guide...
   http://www.heyrick.co.uk/econet/edaig.pdf


Best wishes,

Rick.

-- 
Rick Murray, eeePC901 & ADSL WiFI'd into it, all ETLAs!
BBC B: DNFS, 2 x 5.25" floppies, EPROM prog, Acorn TTX
E01S FileStore, A3000/A5000/RiscPC/various PCs/blahblah...
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>