Date   : Thu, 02 Sep 2010 19:23:22 +1030
From   : station240@... (paul aslin)
Subject: Does MOS 4.0 work properly in a full Master ?

> Date: Fri, 27 Aug 2010 18:59:26 +0100
> From: jgh@...

> I haven't got around to looking into it in detail, but are
> you sure the Tube code is in MOS 4? I though MOS 4 chucked
> away all the drivers for everything. I seem to remember
> people ended up putting MOS 3 into Master ETs so they could
> use the analogue and serial ports.

Analogue port doesn't work, just returns a stream of 255. Possibly done on
purpose to prevent odd behaviour.
I managed to make a crude input test using a resistor jumpered to pins on
the ADC as I couldn't find a pinout of the socket itself at the time.

Unlike the 1770 socket there aren't odd wires jumpering pins together.

Anyway, can't get a 28 pin to 32 pin PLCC adapter anywhere for sane money, 
unless I buy mark's kit. Sort of spoils the challenge of making my own roms
if its easy to have Mark burn them too. Plus I still need a way to plug 32KB
roms into something besides the SWR sockets. Going to make my own rom board
as a result.