Date : Wed, 07 Dec 1983 13:39:17 EST
From : Keith Petersen <w8sdz@brl>
Subject: BYE3-12 updated to BYE3-13
On SIMTEL20 MICRO:<CPM.BYE3>BYE3-12.ASM has been updated to BYE3-13.ASM.
Steve Sanders of the Tampa Bay RCPM made the following updates:
12/07/83 Added missing labels for PWMSG and WRGMSG and also the IF
v1.3 statement missing before NULLS (IF NOT OXGATE). Also added
the newest SMINIT and MDQUIT routines extensively tested
and used on-line (3 months) with BY2-17KS.
This program allows modem callers to use your CP/M system just as if
they were seated at the system console. Special assembly-time options
allow limiting the caller's access by password and/or access to only a
message-service program. This is based on a program written by Dave
Jaffe in January, 1979. A number of external routines are available
to adapt this program to various computers.
If the option BYELOW is set 'NO' it automatically locates itself above
the BIOS at top of memory. Otherwise it sits just below CCP, not re-
quiring any alteration in the location of CP/M via MOVECPM.
BYE3 supports the following modems and/or USART combinations:
1602 - by Paul Traina BY3-1602.ASM
2651 - by Paul Traina BY3-2651.ASM
8250 - by Thom Quick BY3-8250.ASM
8251 - by Paul Traina BY3-8251.ASM
8251+CTC timer - by Irv Hoff BY3-DATA.ASM
APPLE-CAT - by Dave Roznar BY3-ACAT.ASM
HZ-100+Smart. - by John Ferguson BY3-HZSM.ASM
HZ89+Smart. - by Paul Train BY3-89SM.ASM
Kaypro and Hayes smartmodem BY3+KPSM.ASM
MM100 - by Dave Jaffe BY3-DCH .ASM
MMII (Apple) - by Paul Traina BY3-MMII.ASM
PMMI - by Ward Christensen BY3-PMMI.ASM
SIO - by Steve Fox BY3-SIO .ASM
Smartmodem - by Don Brown BY3+SMDM.ASM
Televideo 802 - by K. Robesky BY3-T802.ASM
If you are using either a Hayes Smartmodem, U.S. Robotics or a Rixon
type modem, you must install the "BY3+SMDM" module which contains the
code needed to initialize the Smartmodem and then set the SMODEM op-
tion to 'YES'.