Date   : Fri, 30 Dec 1983 13:27:15 EST
From   : Keith Petersen <w8sdz@brl>
Subject: New Apple CP/M overlay for MDM7xx

M7AP-2.ASM, an updated Apple CP/M overlay for MDM7xx, is now available
on SIMTEL20 in the MICRO:<CPM.MODEM7> directory.

This overlay file enables Apple II computers with the Apple Super
Serial card and external modem to use the MDM7xx phone modem program.
It also supports the following Apple modem configurations:

      a) CCS 7710 serial interface and external modem
      b) SSM serial interface and external modem
      c) Apple communications interface and external modem
      d) Mountain Hardware CPS Multifunction card and external modem
      e) Prometheus Versacard with software baud select and ext. modem

To use SET with the Prometheus Versacard a small hardware mod must be
made, since the Versacard only supports baud rate selection via DIP 
switches. This Mod will allow the Versacard to be switched between
300 and 1200 baud via software.

Revision history:

12/26/83 - Added Versacard support with               
           software baud selection. Revised        
           to allow easy serial card relocation
           made SYSVER more informative.      - Tony Antonucci
11/11/83 - Renamed to M7AP-1.ASM, no changes  - Irv Hoff
10/07/83 - Added CPS card support             - Wally Hubbard
07/27/83 - Renamed to work with MDM712        - Irv Hoff
07/01/83 - Revised to work with MDM711        - Irv Hoff
06/22/83 - Revised to work with MDM710        - Irv Hoff
05/27/83 - Updated to work with MDM709        - Irv Hoff
05/15/83 - Revised to work with MDM708        - Irv Hoff
04/11/83 - Updated to work with MDM707        - Irv Hoff
04/04/83 - Updated to work with MDM706        - Irv Hoff
02/27/83 - Updated to work with MDM705        - Irv Hoff
02/12/83 - Used MDM703CF to make this file
           for Apple computers using a var-
           iety of serial interface cards
           with external modem.               - Bruce Kargol