Date : Thu, 18 Apr 1985 12:17:00 MST
From : Keith Petersen <W8SDZ@SIMTEL20.ARPA>
Subject: BYE333 available from SIMTEL20
Thanks to Steve Noland <NOLAND@USC-ISI.ARPA> we now have available
from SIMTEL20 the newly-released (15-Apr-85) BYE333 and its COMPLETE
set of new overlays.
For those who want the whole package:
Filename Type Bytes CRC
Directory MICRO:<CPM.BYE3>
BYE3-OVL.LBR.1 BINARY 105600 32E0H * see note below
BYE333.LBR.1 BINARY 55936 105AH
I have extracted all the files from both .LBRs so users can select the
overlay they need:
Filename Type Bytes CRC
Directory MICRO:<CPM.BYE3>
ASMB3.SUB.1 ASCII 1580 3AACH * see note below
B3-2718.IQS.1 BINARY 4992 5228H
B31602-4.IQS.1 BINARY 3456 9DBDH
B32718-4.IQS.1 BINARY 4992 639BH
B3ACAT-6.IQS.1 BINARY 4224 94B6H
B3APMN-8.IQS.1 BINARY 4224 48A5H
B3CCS-3.IQS.1 BINARY 5632 F93FH
B3CERM-5.IQS.1 BINARY 3712 08A5H
B3COMP-9.IQS.1 BINARY 5888 C3D8H
B3DATA-6.IQS.1 BINARY 4224 6260H
B3DCH-6.IQS.1 BINARY 3456 E32BH
B3EPQX-3.IQS.1 BINARY 4096 FE97H
B3HZ10-6.IQS.1 BINARY 4608 85AEH
B3HZ89-6.IQS.1 BINARY 4224 B406H
B3IM-3.DQC.1 BINARY 3840 A875H * see note below
B3KPRO-8.IQS.1 BINARY 3968 EE44H
B3LBD-6.IQS.1 BINARY 4992 F85DH
B3MD-4.IQS.1 BINARY 5120 EEAFH
B3MMII-6.IQS.1 BINARY 3840 0615H
B3OSCP-6.IQS.1 BINARY 4224 69F3H
B3SB-1.IQS.1 BINARY 3968 DD0BH
B3SIO-6.IQS.1 BINARY 4480 CAA7H
B3T802-6.IQS.1 BINARY 5376 B644H
B3TRS1-6.IQS.1 BINARY 3584 61D6H
B3USR-4.IQS.1 BINARY 4096 40E6H
BYE333.AQM.1 BINARY 49408 D977H
BYE333.INF.1 ASCII 3218 E6A7H
BYE333.IQF.1 BINARY 2432 B445H
Notes:
* B3IM-3.DOC - Adapts all modems using Hayes protocol to BYE333 (or
higher) and intelligent modems like:
Hayes Smartmodem (300 or 1200 or 2400)
Racal-Vadic Maxwell 1200V or 2400V
U.S. Robotics (300 or 1200 or 2400)
Promodem, Anchor and others
* Many of the inserts in the BYE3-OVL.LBR have been corrected
since BYE332 was released. Be sure to get the latest version
for your port (BYE3-OVL.LBR dated 4/15/85 which is the one we have
here at SIMTEL20).
* ASMB3.SUB shows how to (more simply) edit and assemble BYE33n.ASM
for multiple versions and/or many changes... WITHOUT always editing
the humongous 80K source each time.
* BYE3 inserts currently available - BYE3.ASM takes full advantage of
the result codes returned by modems using "AT" protocol. It uses the
terse mode to recognize the speed of the incoming signal and
automatically adjusts the computer I/O to that speed, without the user
needing to type any CR's. This is of particular benefit for RCPM
systems using the new 300/1200/2400 modems.
Versions of BYE2 and BYE3 prior to BYE331 have relied on the old PMMI
routine to match the incoming speed by adjusting the I/O baud rate
until recognizing a CR from a string of CR's sent by the user. That
method is not needed by modems using "AT" result codes. The PMMI does
not support 1200 or 2400 bps in any event, hence very few are
currently in use.
All the inserts below have been altered to work with the new versions
of BYE3. 2400 bps was added to each from information supplied by the
manufacturer's data sheets and/or overlays developed for MDM7, MEX1,
etc. BYE3 has an equate to set with the highest speed available for
your modem, whether 300 or 1200 or 2400 bps.
BYE3 includes smartmodem routines developed for use with modems using
the "AT" protocol pioneered by Hayes. No external smartmodem inserts
are thus needed, except for systems such as the Cermetek which use
their own protocol. The included smartmodem routines also allow
answering on first ring, with optional echo-checking offered by some
modems for insured accuracy of command accectance.
REMEMBER: These are inserts, not overlays. They go into
BYE3 at the area specifified by the ++++ char-
acters, near the start of the program.
Hardware specific inserts
-------------------------
B32718-4.INS CCS2718 serial board
B31602-4.INS TRS80 Model III with 1602
B3ACAT-6.INS Apple II with Novation Apple-Cat modem card
B3APMN-8.INS Apple II with Mountain CPS serial card and external modem
B3CCS-3.INS CCS2719 & Sierra Data Science SIO/CTC
B3CERM-5.INS Cermetek Infomate 212a control code
B3COMP-9.INS CompuPro Interfacer 3 or 4, System Support 1 systems
B3DATA-6.INS Datapoint insert (8251A and CTC timer to set baud rates)
B3DCH-6.INS Apple II with Hayes Micromodem 100 or 80-103 modem card
B3EPQX-3.INS Epson QX-10 with 7201 MPSC and 4618 RTC as timer
B3HZ10-6.INS Heath/Zenith -100 series (2661B at 4.9 MHz.)
B3HZ89-6.INS Heath/Zenith H89 (8250 I/O at 2 MHz.)
B3KPRO-8.INS KayPro (Zilog SIO)
B3LBD-6.INS AMPRO "little board" with Zilog Dart I/O and CTC baud rate
B3MD-4.INS Morrow MicroDecision computer
B3MMII-6.INS Apple II with Hayes Micromodem II card
B3SB-1.INS Intertec Superbrain (8251 and BR1941 timer)
B3OSCP-6.INS Osborne OS-1 with COMM-PAC internal modem (300 baud only)
B3SIO-6.INS Zilog SIO insert with CTC timer to set baud rates
B3T802-6.INS TeleVideo TS-802 with external modem
B3TRS1-6.INS Radio Shack TRS-80 Model I
B3USR-4.INS US Robotics S-100 plug in modem board (8251)
(Others will be added as they become available.)
--end--