Date   : Fri, 03 May 1985 13:16:12 pdt
From   : "James E. Harmon" <harmonj%marlin@NOSC.ARPA>
Subject: Re: Kaypro connected to LAN at 9600 baud

Tom,
I didn't get a good return address so I'll reply to the net.

I have had the same problem with both a Kaypro 2 and a Kaypro 4 when they
are connected to a Sytek LAN here at NOSC.  It skips part of a line at
any speed greater than 1200 baud.  I have used Kaypro's TERM program,
MODEM7, KERMIT, and the NOSC TRANSFER terminal programs on the Kaypros
with the same result.
1200 baud works fine for both the Sytek LAN and the Hayes Smartmodem 1200.

Good Luck,

Jim Harmon
(harmonj@NOSC)