Date   : Mon, 19 Aug 1985 23:46:29 PDT
From   : crash!kevinb@SDCSVAX.ARPA
Subject: Need info re:Imsai 8080 frontpanel system

I am seeking information about a system I am trying to resurrect. The
system is as follows:

Imsai S-100 power supply, 21 slot motherboard
Imsai 8080 frontpanel
Cromemco ZPU card
(2)Problem Solver Systems RAM16 16k static RAM cards
(1)problem Solver Systems RAM65 16K static RAM card
Cromemco 8K Bytesaver with the following slots populated:
       0 a chip marked: system test +Tarbell init + Zapple
       4 a chip marked: Zapple 4
       5 a chip marked: Zapple 5 (Tarbell)
Canada(with a ~ over the n) CL2400 (1 wire hanging from it)
North Star Micro Disk MDC-A4
Imsai SIO (rev. 3)
(2) Perkin-Elmer Model 182 drives (51/4")

I only have info on the RAM cards and the disk controller card, can get Zapple
1.1 monitor  at 1200 baud on the monitor, but cannot boot. Help me restore
an antique, and a classic. Please reply if you have any info to:

Kevin J. Belles - UUCP {ihnp4,cbosgd,sdcsvax,noscvax}crash!kevinb
~~~~~ ~~ ~~~~~~ - ARPA crash!kevinb@{ucsd,nosc}.ARPA
                 REAL c/o Avalon I, 4037 34th St., Ste 4, San Diego CA 92104

Any info, manuals, support locations would be great. KjB