Date   : Sun, 01 Sep 1985101:57:00-MDT
From   : CLEMENTS@BBNG.ARPA
Subject: W0RLI MailBox/GateWay v 10.0

Version 10.0 of the W0RLI MailBox/Gateway has been released.  The
sources and binaries have been posted to SIMTEL20, and are also
available on disk from the author.

Filename                       Type     Bytes   CRC

SIMTEL20 directory MICRO:<CPM.PACKET>
PACKT100.LBR.1                 BINARY  275584  5E49H

The changes since the last such posting, version 9.3, are summarized
below in an extract from the NOTES.TNC file.

For those who have not seen this system before, a brief description:

The W0RLI MailBox and GateWay is a system which runs on a Xerox 820
computer and which operates on Amateur Packet Radio via one or two
TAPR TNCs (or clones). It also runs with TNC-2s (W3IWI is running one).

The W0RLI system is running at over 75 sites in some number of
countries and makes up the majority of the packet mail forwarding
system. It is also used for gatewaying between local packet areas and
long haul links on HF, or to nearby nets on other VHF/UHF bands.
For a more complete description, see NOTES.TNC.


Hank is not on ARPANET or Usenet.  I will be glad to relay comments
and questions to him.  If you want the distribution on disk, send
a self-addressed stamped 8" SSSD disk (in re-usable mailer) to Hank at
his callbook address. Two disks if you want the sources as well.
To reduce the load on Hank, I will do the same under the same conditions.
I am also good in the Callbook.

73,
Bob, K1BC

ARPANET: CLEMENTS@BBN
Usenet:  {ihnp4, decvax, linus, ...}!bbncca!clements

[Extract of NOTES.TNC follows]

     W0RLI MailBox and GateWay   Version 10.0

     Changes and additions since version 9.9 are:

Added Exclude user if has illegal call.
Added Exclude user by # digipeaters used.
Added TO call and first 32 chars of title to log on S.
Added @ BBS to M command.
L@ - List msgs @ BBS added.
File names in config.tnc: user.dat, mail.dat, msg.tmp
GateWay YES/NO on local menu.
Better handling of connects using user file.
Commands to send to tnc for state changes in config.tnc.
Cleaned up user login code, bug with linked user privelege.
Added Sx AAA [@ BBB] [< CCC] (and all varients).

     Changes and additions since version 9.8 are:

Cleanup gateway connect init code.
Add $J, $K, $M, $P
Store most recent SSID in user record. Use for connects.
MON.TNC specified in config.tnc.
Store null path in user record if user connects direct and
record HAD a path.

     Changes and additions since version 9.7 are:

GateWay connect checks user.dat for path.
DU lists from most recent.
F did not pick up msg #
Added date/time stamp to end of MON.TNC, write it periodically

     Changes and additions since version 9.5 are:

D/U/O did not pick up argument. (9.6 and 9.7).
E <msgnr>, blanked file title (9.6 only).
J lists now saved in file MON.TNC.
Fixed broken KT. (9.6 only?).
Removed the YES/NO for "connect with owners call" from config.tnc,
it is handled by the owners user record.
Clean up of code, minor bug fixes.
Upper/lower case ok in fwd.tnc
Change to z80 mnemonics.


     Changes and additions since version 9.3 are:

Changed forward priority, AT bbs used if there, TO call if not.
Current msg # updated to correct number after GR.
Fixed spurious connect during forwarding.
Added edit of 'AT BBS' to edit message header.
Fix of bug, lost correct call if msg entered after force fwd.
Fix to untangle - long message it fails.
Fixed broken remote sysop mode.

[End of extract]