Date   : Thu, 05 Sep 1985 12:20:35 MDT
From   : Daemon wsmr01 <daemon@WSMR.ARPA>
Subject: Stranded Mail

The following message was stranded in the mailer queue, and has been returned
to you for re-transmission (use the Forward command).  If you know the original
message was received, send a message to "hotline.  - Thanks -
-r--------   1 root     bin         1432 Sep  5 11:54 1D7-1370241

Received: from AMSAA.ARPA by WSMR.ARPA ; 5 Sep 85 11:53:59 MDT
Received: from brl-tgr.arpa by AMSAA.ARPA id a000837; 5 Sep 85 12:45 EDT
Received: from usenet by TGR.BRL.ARPA id a026692; 5 Sep 85 12:44 EDT
From: Chuck McManis <cem%intelca.uucp@BRL.ARPA>
Newsgroups: net.micro.cpm
Subject: Re: Re: Prgrmr nds HELP!
Message-ID: <55@intelca.UUCP>
Date: 4 Sep 85 19:21:33 GMT
To:       info-cpm@AMSAA.ARPA

> Thanks for your response, but I think you missed the point.  I want 
> the
> program and its data files to be renamable.  Then the .COM file will find the
> data files by looking for the extensions (which remain constant) with the 
> same
> name as the .COM file.  And at 080H there is definitely no file name, 
> just the
> command tail.
> 
> If you know where the command name/FCB/File-name-as-typed-in is stored
> , or how
> to find it, please drop me a note.
> 

One of the nice things about ZCPR3 is that it leaves the command name
in the EXTFCB address. I suspect the information in a vanilla system
is stored somewhere in the CCP. (Try looking at the first page) most
of the buffers are up there.
--Chuck

-- 
                                            - - - D I S C L A I M E R - - - 
{ihnp4,fortune}!dual\                     All opinions expressed herein are my
        {qantel,idi}-> !intelca!cem       own and not those of my employer, my
 {ucbvax,hao}!hplabs/                     friends, or my avocado plant. :-}