Date   : Mon, 24 Feb 1986 20:49:40 EST
From   : NBaheti.es@xerox.ARPA
Subject: Apple MEX help

     I  am  posting  the following message for a  friend  who  is 
having some troubles.  If you want to respond via the Nets,  feel 
free  to do so to my account and I'll forward all replies to  him 
within a day. I am not on info-apple, so please reply directly to 
me or cc me on your reply; thanks.

--Arun Baheti
  arpa: NBaheti.es@Xerox.COM
  rcpm: 213-530-0670


     I  am  trying  to put together a working MEX  1.14  for  the 
following equipment and am getting nowhere.  I can get the MEX to 
install properly, etc. but then when I get to terminal mode all I 
can  get  the system to do is give me the help menu  (ESC+?)  and 
exit  to command mode (ESC-E).  I can't get the modem to  receive 
any  data at all from the keyboard.  I've tried  everything  (ie: 
switching slots,  checking cards, power off, unplug, ad naseum in 
finium);  anyone have any ideas? or better yet, a working copy of 
MEX 1.14 for the below system?

     Apple //e
     Apple SSC (dips set ON are: 24567 12345) in slot #2
     Micro-Soft Premium Softcard //e in auxiliary slot
     Disk // controller card in slot #6
     Sider 1 10M drive controller card in slot #7

     I  know  the above will work somehow,  since I have  a  MDM7 
configured and working (taken off a local RCP/M). I need MEX so I 
can use the USR Courier 2400 at 2400 baud instead of 300/1200. If 
you  can  help out feel free to call me voice at 213-539-9395  or 
530-0845 anytime after 2:00pm. Thanks in advance for your help.