Date   : Fri, 23 Jan 1987 22:27:00 MST
From   : Keith Petersen <W8SDZ@SIMTEL20.arpa>
Subject: New version of RDCBM for Commodore C128 CP/M

Now available from SIMTEL20...

Filename                       Type     Bytes   CRC

Directory PD:<CPM.C128>
RDCBM20.LBR.1                  BINARY   17280  B99EH

    This program is a general purpose file copier, which copies from a
Commodore DOS format disk to a CP/M disk.  It is designed to be faster
and more convenient to use than any of the existing CBM->CP/M copiers.
It uses burst mode on 1571 drives, and can write to the 17xx RAM
expander or to a 1571 onto any format disk the drive supports.  It does
not require you to exit from CP/M to use it, as it is a CP/M transient
utility.
    Version 2.0 corrects a serious bug in version 1.0, and as a side
benefit is smaller and faster.  Version 1.0 stripped a few hundred
bytes from the beginning of binary files when copied, and also had
problems handling files larger than the memory buffer.  Version 2.0
corrects both of these problems, and has been completely tested on both
types of floppy drive and the RAM expander, and properly performs
binary and text copies on one drive or two.

Hardware requirements are as follows:

    o A Commodore 128 computer

    o At least one 1541 or 1571 disk drive (1571 recommended)

    o Optional but recommended 1700 or 1750 RAM expansion


    The program is set up to operate with two drives, and in fact this
decreased the code size substantially.  However, it works reasonably
well with one floppy if you select drive E as the second drive.

--Keith