<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Tue, 18 Aug 1987 15:11:00 +0600
From   : Daniel Keizer <busu%cc.uofm.cdn%ubc.csnet@RELAY.CS.NET>
Subject: Osborne IEEE -> Centronics 

Here is an exerpt of a message I am forwarding to the net for others who
might have such a need.


=================
Date: 17 Aug 87 18:58 +0600
From: Daniel Keizer <busu@cc.uofm.cdn>
To: SAC.HQSAC-DOCT@e.isi.edu
In-Reply-To: <[E.ISI.EDU]15-Aug-87 14:26:05.SAC.HQSAC-DOCT>
Message-ID: <19*busu@cc.uofm.cdn>
Subject: Re: Osborne Exec output to printers
Return-Receipt-To: Daniel Keizer <busu@cc.uofm.cdn>

Hi again ... I managed to dig up the specs on the IEEE -> Centronics
parallel port D connector.  Specs is as follows:

Cen               Ozzy
1                 11
2                 1
3                 3
4                 5
5                  7
6                 2
7                 4
8                 6
9                 8
11                15
13                19
19                12
29                18

The osborne connector is numbered with one being in the upper
right corner and the numbers alternating across the printed 
circuit edge.

Thanks to Gordon McAndrew, Brandon University, Manitoba, CANADA

Dan Keizer.
BUSU@CC.UOFM.CDN
BUSU@UOFMCC.BITNET
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>