Date   : Sun, 14 Feb 1988 22:01:42 GMT
From   : dalcs!dalcsug!seeley@uunet.uu.net (Geoff Seeley)
Subject: CBM <---> CP/M

In article <36@marque.mu.edu>, dennisf@marque.mu.edu (Dennis Flaherty) writes:
> 
> Does anybody have a program to move software from C128 to CP/M?
> The program MUST run in C128 mode, of course, since if it ran only
> in CP/M mode, I wouldn't be able to run it!  I tried downloading
> from RPICICGE the file PD:<CPM.C128>64CONVRT, but 64convrt doesn't
> read the CP/M directory correctly.
> 
       The 64CONVRT program will work correctly, but the CP/M
       disk that is to be used must be formatted as a 64 SINGLE
       SIDED disk.
       Here is what I did to get a working copy of a terminal 
       program under CP/M (IMP.COM):
       I first downloaded a copy of IMP.COM from a local BBS.
       Next I downloaded a copy of the 64CONVRT program.
       Boot up CP/M and type FORMAT to format a new CP/M disk.
       Select 64 SINGLE SIDED. The convert program will only
       read/write to this format. Run the convert program
       and transfer the terminal program to the new CP/M disk.
       Once you have the program on a CP/M disk you can then
       transfer it over to a double sided c128 CP/M format.
       Once you get IMP up and running, you can download CP/M
       programs directly to a CP/M formatted disk.

                                               Geoff Seeley
                                               (seeley@dalcsug.UUCP)

-- 
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ 
 \ Mail replies, questions, | "Oh no ... the brakes don't work! ... Guess
    /  / money, women, beer, etc. |       theres no sense in steering now."
        \  \           to:            |        -Bob & Doug Mckenzie (STRANGE
BREW)      /
/  seeley@dalcsug.uucp     |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
 \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/