Date   : Mon, 25 Jul 1988 16:06:00 GMT
From   : killer!tness7!ninja!sys1!techsup!kenb@ames.arc.nasa.gov
Subject: help with zcom and zcpr1

....zzzzz

perhaps someone can help shed some light on a problem i'm having.  i 
run pickles and trout cp/m 2.2mh on a radio shack model ii/16 with a 
15 meg hard drive.

for some time i've been successfully running zcom on the system, but 
this eats up quite a bit of my tpa and so i have memory problems with 
programs that are tpa hungry... compilers, ark02, ...

i located a copy of zcpr1, assembled it for cb00h, where my stock ccp 
loads, inserted it in the appropriate p&t hard drive file 
(bioscp/m.pnt), fixed the relocation bitmap for it and ran it.  no 
problems so far.

i figured i'd use zcpr1 when i had to do memory hungry stuff, and load 
zcom when not.  with the zcpr1 loaded, i typed in the command to bring 
up zcom (with zrdos and zcpr33 installed) as normal.  the first 
indication i got that things weren't loading well was when hsh errored 
and told me it needed zcpr33 to run.  things whirred and clicked a 
moment longer and then settled out to the prompt ">".  not much 
functionality was left at this time...  although zcx worked.

so... the question is, since the zcpr1 ccp fit exactly where the stock 
ccp resided, why didn't zcom sign on correctly?  i even tried doing 
the zcld again...  but things didn't change.

i figure i'm missing something obvious....   if you have any ideas, 
please let me know.   thanks...

ken brookner
uucp:     ...sys1!techsup!kenb
GEnie:    kbrookner