Date   : Fri, 03 Feb 1989 17:55:39 GMT
From   : hpda!hpwala!cfisun!lakart!dg@ucbvax.Berkeley.EDU (David Goodenough)
Subject: Adding a hard disk to your system

From article <2101@sigma.UUCP>, by bill@sigma.UUCP (William Swan):
> In article <404@lakart.UUCP> dg@lakart.UUCP (David Goodenough) writes:
>>If anyone is contemplating adding an inexpensive hard disk to a floppy
>>only CP/M system, they might want to consider the following. 
>>[..daughterboard into the Z80 socket...]
> 
> One question, though:  What does it cost?

I bought just the controller card and cables and software for about $200
If you add a hard disk, a powersupply and enclosure, I'd guess that the
cost would rise to no more than $500, possibly less. I don't actually
know, because I wasn't interested in a PSU or a disk (I already had both).
I'd say give them a call, or write. If you DO phone, don't be put off if
it sounds like a private residence, it's a small company, and I think
they don't have a proper switchboard operator. Whoever can get it answers
the phone.
-- 
       dg@lakart.UUCP - David Goodenough               +---+
                                               IHS     | +-+-+
       ....... !harvard!xait!lakart!dg                 +-+-+ |
AKA:   dg%lakart.uucp@xait.xerox.com                     +---+