Date   : Wed, 29 Mar 1989 21:55:39 -0600
From   : mknox@emx.utexas.edu (Margaret H. Knox)
Subject: Backing up P&T CP/M

For Greg Argendeli who is having trouble backing up his P&T CP/M
boot disk:

  Greg, if you are using versin 2.2E (or even older) you may have
a problem.  Version 2.2E had copy protection on the boot disk -- you
could make as many boot disks as you wanted, but they all had to be
made from the MASTER diskette.  Older 2.2a-d version had a SYSGEN
utility which had to be run in order to move the boot tracks (which
are single density, partly!).

  If you have a current version (2.2m or 2.2mH) then just run CLONE
and follow the questions.  If not, you probably should consider 
getting upgraded.  The upgrade for you (since you already have the
system) would only be $45 plus $3.50 shipping.  If interested (and I
hate to sound commercial here, but this IS the answer to your question)
send a note to:

               TriSoft
               1825 East 38 1/2
               Austin, Texas  78722
               (512) 472-0744

Be SURE to give your OLD P&T serial number, and if you want 2.2m (floppy
only) or 2.2mH (floppy plus hard disk).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I *do* have a relationship to TriSoft, but will  not get rich off of
a $45 transaction.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -