Date   : Sun, 24 Sep 1989 08:32:12 GMT
From   : morris@jade.Berkeley.EDU (Mike Morris)
Subject: CP/M emulator for unix

(David H Close) writes:
>I have run Z80MU under VP/ix under Xenix.  It does work!

The memory that I have of Z80MU is that it runs on an 8088 and has
a ADM-3 "hard wired" in...

Is there a version that runs on a V20?  I would think that it would run
a _lot_ faster - my recolection is that Z80MU ran at about 1-1.3 mhz
(equivalent).  Also, is there any way it can be modified for a ANSI
terminal?  And talk to PRN: as if it was LST: ?  (I assume that COM1:
access  or being to "assign" C: to go to C:\CPMSTUF1 and D: to C:\CPMSTUF2
would be too much...)

My memories of Z80MU are at least 2 years old, and I only had a chance to
play with it for 20 minutes or so.  If a newer version is avialable, with
added features, please forgive...

Mike Morris                      UUCP: Morris@Jade.JPL.NASA.gov
                                 ICBM: 34.12 N, 118.02 W
#Include quote.cute.standard     PSTN: 818-447-7052
#Include disclaimer.standard     cat flames.all > /dev/null