<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Mon, 02 Jul 1990 20:41:53 PDT
From   : cwr@pnet01.cts.com (Will Rose)
Subject: Wordstart opening screens

The easiest way to speed the start up of CP/M WS 3.3 is to use DDT to put
a NOP just after the start of the screen data, which is near the front of
the ws.com file (I think the file's right - I know its near the front). I
found the right place pretty quickly, but it was a few years ago.

I also wrote an overlay to patch WS 3.3 with MLOAD, once and for all. If 
anyone wants a copy, email me and I'll try to dig it out.  Basically (well,
assembler, actually...) a list of all the patch points I could dig out of
miscellaneous sources.

Good luck - Will
 
"If heaven too had passions  | Will Rose
     even heaven would       | UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cw
     grow old."  -  Li Ho.   | ARPA: crash!pnet01!cwr@nosc.mil
                             | INET: cwr@pnet01.cts.com


UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cwr
ARPA: crash!pnet01!cwr@nosc.mil
INET: cwr@pnet01.cts.com



End of INFO-CPM Digest V90 Issue #112
*************************************
<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>