Date   : Fri, 17 Aug 1990 16:30:22 GMT
From   : usc!samsung!munnari.oz.au!sirius.ucs.adelaide.edu.au!levels!etrmg@ucsd.edu
Subject: Kaypro 4 and 2400 Baud

In article <90227.211956NETOPRDW@ncsuvm.ncsu.edu>, NETOPRDW@ncsuvm.ncsu.edu
writes:
> Thanks for the info.   I am still running at 2.5MHz, does anyone know
> If I can get a clock speed upgrade to 5 or 8 MHz? and If so, from where
> and how much It will cost me?
> --------------------------------------------------------------------------
> Monty: You're SURE you finished?   | BITNET:NETOPRDW AT NCSUVM
> Gadget: Sure I'm sure.             | internet:netoprdw@ncsuvm.ncsu.edu
> Monty: Not like the Last time?     |_____________________________________
> Gadget: Oh, Monty, How many times can the wings fall off a plane?

You may find all the info you need in a few old issues of MicroCornucopia.
Give them a ring at 503-382-5060 Someone may answer still (if you're lucky)
and then you can order the right issues.  Alternatively, you could send
something to POB 223; Bend, Oregon  97709.  I know uC is out of business, but
you may still get in touch (Dave Thompson is a great guy)  Also, you could
contact Microsphere in Bend too.  Dave's bro runs it & is still in business.
503-388-1194   (Beware, these numbers are from a 1985 issue so don't get mad
if they aren't correct)

Of course if all this fails, send me your address and I'll send you some copies
of the pertinent articles.  They had Ram disks and video mods too so check
it out!  See you.

Ronn


End of INFO-CPM Digest V90 Issue #131
*************************************