Date   : Sun, 28 Oct 1990 09:09:05 GMT
From   : mcsun!unido!balu!schauerd%cosmo.UUCP@uunet.uu.net (Klaus Schauer)
Subject: Zmp and Qterm

> Has anyone gotten Zmp or Qterm running on an Osborne 1? I haven't been 
> able to find overlays for either one for the Osborne 1. Any help would 
> be appreciated.

I wrote ZMP V1.5 and MEX V1.14 modem programm overlays for the 
OSBORNE 1. Both supported most of the needed functions - baud 
rate switch, bits, modem init, break, disconnect, etc. The MEX 
overlay also emulate an VT100 (ANSI) terminal.
If you work with an 2400 baud modem my hardware extention would 
be useful for you. This extention use the OSBORNE 1 modem port to 
generate an real RS - 232 C interface. So you can send an break 
and disconnect to the modem . The overlays works with the 
extention and allow to switch between three (four) baud rates 
-300,600,1200,2400-.
If you are interested in the overlays or in the schematics please 
contact me.

Klaus Schauer
Auf den Kempen 31
D-4052 Korschenbroich 2
Germany (West)


End of INFO-CPM Digest V90 Issue #166
*************************************