Date   : Tue, 30 Oct 1990 15:48:03 GMT
From   : ames.arc.nasa.gov!rrobinson@ames.arc.nasa.gov (Randall W. Robinson)
Subject: Compupro - MP/M 8-16 info wanted

A while back, I got a compupro system.  Unfortunatly, the supply of
documentation is limited.
It came with G & G's MP/M 8-16 (I am assuming that G & G engineering
took standard MP/M and added 
goodies to it). I suspect that it is missing some of the utilities, but
I cannot be sure, due to 
the missing documentation.


1) What is the proper way to put it into multi-user.  I tried to do it
by typing "logout" and
get a login prompt at the terminals (currently only two).  I can login,
but it does not seem to
recognize that a user on on the system.  For example, I sent my self
mail, I looked at it manually,
but I cannot read it with mail ("you have no mail").  What am I doing wrong?

2) How do I set the default buad rate on the console port.  It wants to
be 19.2 at power-up. I can
change it to 9600 after I issue the "logout", but it goes back to 19.2
after reset or power-up.

3) What would be a default set of parameters for a gen.  I have them for
standard Digital Research
MP/M, but G & G appears to be different.  I have looked at things on the
disks that I have, but
they look like they are not "standard".

4) Any other information they you might have on this system.


-- Randall W. Robinson

 rrobinson@ames.arc.nasa.gov