<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Thu, 06 Dec 1990 19:51:21 GMT
From   : csusac!sactoh0!ijpc!ianj@ucdavis.ucdavis.edu (Ian Justman)
Subject: Dynabyte CP/M system - HELP!

donm@pnet07.cts.com (Don Maslin) writes:

> cs202101@umbc5.umbc.edu writes:

> >I was going to attempt writing a com program for it,
> >but it appears to have a non-standard UART (I'm guessing that this chip
> >is the UART, since there are two of these chips on the CPU card and they
> >appear to be connected to the serial port connectors); the chips in question
> >have TMS 5550 marked on them (if I recall correctly from when I had the
> >CPU card removed from the system).
> 
> There is an overlay for NightOwl Softwares MEX communication software for the
> Dynabyte DB 8/1.  The overlay is designated MXO-DB10.ASM, and should be on
> many BBS that handle CP/M stuff along with the PD MEX114.LBR package.  If the
> overlay is not directly applicable, it should at least be similar.

I wrote a number of overlays for a few other comm programs for
the Dynabyte, like ZMP (my personal favorite) and Qterm and UUCP
(these two I am a beta tester for and I run a UUCP site with it,
namely ijsys (reachable via
...!ames!pacbell!sactoh0!ijsys!ianj)), and will continue to
write.  I'm debating whether I ought to write one for IMP, and
I've been thinking of overhauling the MEX overlay because it
doesn't support anything over 1200 baud.

> >Is there anyone out there who is familiar with this system, its UARTS,
> >or who has any ideas about how to get a communications and file transfer
> >program set up and running on this system?  Thanks in advance for any
> >information.
> >
> If it would be useful, I can send you a uuencoded package called BOOTSTRP.LBR
> which contains a couple of approaches to overcoming the initial 'no-comm'
> hurdle.

He may need an .LBR extractor, or it might be better to send the
source (if any) straight to him because I don't think he has a
LBR extractor for his Dynabyte.  Or better yet, if he has a DOS
box (or access to one), send him one for DOS.

I've also talked to the guy.  He doesn't have all that much for
it except what he already has.

<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>