Date   : Wed, 06 Mar 1991 17:50:27 GMT
From   : agate!bionet!uwm.edu!spool.mu.edu!mips!twg.com!frank@ucbvax.Berkeley.EDU (Frank McConnell)
Subject: Wanted: Shugart SA860 drive info

I picked up a few SA860 drives as spares a while back; these are
half-height 8" drives, and as such don't have the nice hefty 110 VAC
motors found in canonical full-height drives.  Instead, these drives
look much like what PC 5.25" half-heights aspire to be when they
grow up, with a bigger version of the "flat" spindle motor and a 
quarter-turn handle to "close" the drive.

I now would like to use these to replace a pair of SA850 full-height
drives.  The problem is, these drives have a single power connector
that is different from either of the two on the 850s, and of course
I have no service or installation manual for the 860s :-(.
  
Does anyone out there have info on what the power connector expects?
Or, perhaps, pointers on where I could get the documentation for the
drives?  (Or even tales of terror about the troubles I'm asking for!)

Feel free to mail me; I'll summarize mailed responses.

Thanks in advance!

-Frank McConnell "I want my MPE"  E-mail: <FRANK@TWG.COM> Tel: +1 415 969 3770